Advertising Player Maintenance Instructions
Advertising Player needs maintaince, it needs to be cleaned after a period of time to prolong its lifespan?
1. Q: Now, how do you clean advertising player when is dirty, how do you clean the shell?
Answer: You can use a wet cotton cloth to wipe, be careful not to use any other cleaner.
2. Q: How to deal with the interference of mixed grain appeared on the screen when you switch on/off the Led ?
Answer: It's the signal interference of the display card, this is normal situation. You can adjust the phase automatically or manually to solve the problem.
3. Q: How to clean the led screen of the advertising player?
Answer: Pay more attention: We can use wet cloth to clean the Led screen, do not use wet cloth containing moisture as far as possible to avoid the water entering
internal led screen caused by short circuit fault;
in order to avoid problem caused by water entering the screen Led internal short circuit; fault, etc.It's better to adopt lens paper and other soft glasses cloth to wipe the Led screen,
It's not only avoid moisture into the Led screen inside, but also protect the screen scratch.
4. Q: What can we do? What are the cautions before one can clean and maintain the advertising player?
Answer:Please disconnect the power cable and ensure no power connection to the machine before cleaning the machine screen, then use a clean soft cloth without thread to dust off the dust gently ,
do not use the spray on the screen directly; It is important to note the following five points:
A. Don't put the product in the rain, no direct exposure to the sun, In order to avoid any effect of the normal use of the product;
B. Please don't block the shell vent of machine, audio pronunciation hole , don't put the advertising machine nearby any radiation, heat source,
or any of that sort it may affect the normal ventilation access.
C. Don't remove or repair machine by yourself, in order to avoid high voltage electric shock or other danger, if you need to repair,
first, check your manual and consult technician or professional personnel,
if not solved, return problem machine to maintain at the factory directly.
D. Because most of the advertising machines are used in the public places, voltage instability may cause damage to the advertising player equipment,
we suggest the use of stable utility, please do not share the power supply together with elevator and a high power equipment, such as voltage instability places,
subway station, etc, be sure to use the corresponding stabilizer voltage equipment, otherwise power may easily cause advertising machine unstable, and even be damaged.
E. please do not forcibly insert card lest you damage the card pins. You should check whether the card is inserted by correct direction. In addition,
please donot insert or eject card when it's in motion, It should be turned off before the operation.
5. Advertising machine life is limited when you frequently switch on/off, this will damage the screen electronic element and advertising machine,
naturally impact use of advertising machine and its lifespan.
6. The electronic equipment regularly will appear electrostatic phenomenon, advertising machine is no exception.
Electrostatic will let dust to the advertising machine in the air, so be sure to do the proper cleaning. Donot use wet cloth to clean,
moisture content donot only provide poor cleaning effect but is also likely to cause circuit damp, so be keen with advertising machine technical maintenance.
7. The use environment will directly affect the use and the lifespan of the advertising machine, so if the light is too bright, even with the light point-blank,
on the one hand affect the visual communication of advertising machine, on the other hand, damage electronic components of the screen. In addition,
advertising machine should be in the appropriate air humidity, environment , poor humidity can cause circuit of electronic equipment problem if under too humid condition.